Stainless Steel Solar Water Heater
Introduction:
The stainless steel non-pressurized solar water heater (solar geyser) is based on the natural circulation thermosiphon phenomenon. It’s the most cost-effectiveness and environmentally friendly way to harness solar energy for hot water applications, which is unsurpassed by any other solar thermal products, for its most high efficiency, low cost and easy installation.
Stainless steel non-pressure solar water heater characteristic:
1. Adopt stainless steel as outer tank and support material.
2. Most reliable, cost saving, efficient hot water heating solution.
3. Simple structure, easy installation, labor cost saving.
4. Automatic operation with intelligent controller.
5. Low maintenance cost.
Stainless steel non-pressure solar water heater specification
1. Inner tank: Stainless steel SS304-2B / SS316L.
2. Outer tank: Stainless steel.
3. Insulation layer: Polyurethane foam, 41 kg/m³ high density.
4. Support: Stainless steel
5. Vacuum tube: Borosilicate glass 3.3, ALN/AIN-SS/CU coating, Φ58×1800mm.
6. Capacity: 50L-360L.
How the non-pressure solar water heater works:
Installation Ways:
Parameter table：
| Model | Vacuum tube | System capacity(L) | Person No. | Loading Qty. (set) | ||||
| Dia. / Len. (mm) | Qty. (pcs) | 20GP | 40GP | 40HQ | ||||
| JNG-10 | 58 | 1800 | 10 | 100 | 2 | 73 | 150 | 175 |
| JNG-12 | 58 | 1800 | 12 | 120 | 2 | 68 | 142 | 160 |
| JNG-15 | 58 | 1800 | 15 | 150 | 3 | 52 | 112 | 130 |
| JNG-18 | 58 | 1800 | 18 | 180 | 3 | 48 | 96 | 115 |
| JNG-20 | 58 | 1800 | 20 | 200 | 4 | 42 | 88 | 98 |
| JNG-24 | 58 | 1800 | 24 | 240 | 5 | 35 | 73 | 86 |
| JNG-30 | 58 | 1800 | 30 | 300 | 6 | 28 | 62 | 68 |
| JNG-36 | 58 | 1800 | 36 | 360 | 7 | 24 | 48 | 60 |
Optional Accessories:
 |
Assistant tank
- Material & Color same as solar tank
- Capacity: 5L - 20L
|
 |
Magnesium rod
- Used for solar tank protection |
|||
| Item No. | Size | Quantity | Item No. | Size | Quantity | |
| 821 820 004 | 3/4 inch | 1 unit | 812 801 001 | Φ20×230mm | 1 unit | |
 |
Electric heater
- Material: Stainless steel
- Connection size: Φ 47mm
|
 |
Electric heater
- Material: Incoloy 800
- Super anti-corrosion& heat
conduction, dry-heat resistant
- Connection size: 1 inch
|
|||
| Item No. | Power | Quantity | Item No. | Power | Quantity | |
| 812 900 193 | 1500W | 1 unit | 812 900 191 | 1500W, 2500W | 1 unit | |
 |
Thermostat electric heater
- Material: Copper / Incoloy 800
- Regulating temperature: 30-85℃
- Connection size: 1.25 inch
|
 |
Thermostatic mixing valve
- Material: Nickle plated brass
- Cold water temperature: 5-29℃
- Hot water temperature: 50-95℃
- Regulating temperature: 35-55℃
- Working pressure: 0.03-1 Mpa
|
|||
| Item No. | Power | Quantity | Item No. | Size | Quantity | |
| 812 900 192 | 1500W, 2500W | 1 unit | 812 007 052 | 3/4 inch | 1 unit | |
 |
Controller (luxury version)
- Used for non-pressure solar heater
- Automatic operation
- Intelligent cold water loading
- Intelligent control electric heater
|
 |
Controller (economic version)
- Used for non-pressure solar heater
- Automatic operation
- Intelligent cold water loading
- Intelligent control electric heater
|
|||
| Item No. | Voltage | Quantity | Item No. | Voltage | Quantity | |
| 812 007 052 | 110V/ 220V | 1 unit | 812 007 008 | 110V/ 220V | 1 unit | |
Next: no
