Insolation level

Check out our Frequently Asked Questions in these other JinYi Solar Water Heater Topics:

SOLAR COLLECTOR FAQ Solar Water heating System Basics Design FAQ
Domestic Hot Water FAQ Solar Radiant Heating FAQ
Solar pool & Spa Heaters FAQ installation & solar sizing FAQ
Frequently Asked Questions Collector Sizing
Insolation level Energy calculator
Reduces CO2 Emissions

What is solar insolation?
The amount of electromagnetic energy (solar radiation) incident on the surface of the earth. Basically that means how much sunlight is shining down on us.

Why is knowing the insolation level useful?
By knowing the insolation levels of a particular region we can determine the size of solar collector that is required. An area with poor insolation levels will need a larger collector than an area with high insolation levels. Once you know your region's insolation level you can more accurately calculate collector size and energy output.

What units are used to express Insolation levels?
The values are generally expressed in kWh/m2/day. This is the amount of solar energy that strikes a square metre of the earth's surface in a single day. Of course this value is averaged to account for differences in the days' length. There are several units that are used throughout the world.

The conversions based on surface area as follows:
1 kWh/m2/day = 317.1 btu/ft2/day = 3.6MJ/m2/day

The raw energy conversions are:
1kWh = 3412 Btu = 3.6MJ = 859.8kcal

Is my region's insolation level low, moderate or high?
The following scale is a basic guide for insolation levels. Although a value of 5 is not considered very high during the summer months, as an average annual value this is very high. You will see that in central Australia, which is a hot, sunny place, the annual average insolation is 5.89.
You may compare you location to the following two extreme locations.
Average annual insolation levels:
Central Australia = 5.89 kWh/m2/day - Very High
Helsinki, Finland = 2.41 kWh/m2/day - Very Low

Now I know my insolation level, how do I calculate my collector's size?
Please click here to visit the collector sizing page.

Click on the links below to view insolation levels for your region.


If you would like to find the insolation levels for your area, please visit the NASA website below.
You just need to know your latitude and longitude. Free registration at the site is required for access.

Nasa Surface meteorology and Solar Energy Data Set

 
  COPYRIGHT(C) 2008-2011 JINYI. ALL RIGHTS RESERVEDCI